Join AP for the first time at “the largest audio/visual technology event in the USA,” InfoComm 2019. We’ll be demonstrating a variety of audio test applications there, and at AISE 2019 in Florida,
… is ±0.0003% (3 PPM), and the output impedance is 50 ohms. Accessing the DSIO Clock As show below, the clock signal appears on pin 5 of the Digital Serial I/O Receiver HD15 jack. Pins 2, 4, 6, 7,…
… by the rms level of the first nine harmonics. In the Distortion Product Level view, the bars show rms level. In the Distortion Product Ratio view, the bars represent the ratio of the rms level of the…
… Option Key Module fastened over the Software Options port on the back panel of the instrument, as shown in Figure 1. The module has a label indicating which options were installed when it left the factory.…
… settings or components. The following graphs highlight just some of the things that a square wave can show:
Generation
What’s a theoretically perfect square wave made of? It contains a sine wave…
… > Control Panel > System and click on the Device Manager button. 2. Go to View, and select Show Hidden devices. 3.The category "Non-Plug and Play Drivers" will be shown. Expand it, locate…
… Make sure that the message is appropriately detailed for the physical setup, then check the options Show OK Button and Set dBPSL. Optionally, check the Timeout (sec) option:
7. Add a second Prompt sequence…
… then normalized, so that the maximum absolute value is 1.0 units (1.0 FS in the digital domain), as shown in Figure 1. For ATS-2 audio analyzers, the maximum generator buffer length is 16,384 samples (about…