Created on 2009-02-12 15:28:00
Question:
I need to be able to use AP Basic to detect the presence of a 150 ohm output impedance option in an ATS-2. Is this possible?
Answer:
Yes it is. You can use the function “ATS2.Hardware.OptionInstalled(apbOutputZ150)”.A return of True indicates that it is present, and False indicates that it is not.
The following undocumented arguments can also be used with the function above in place of “apbOutputZ150” to detect additional installed options:
apbDCX127
apbGPIB
apbHighBandwidth
apbHwSwitcher
apbInputZ600
apbIntervu
apbOutputZ200
apbOutputZ600