Created on 2010-11-18 22:57:00
Question: How do you run the Self Test on the ATS-1 or Portable One?
Answer: To put an ATS-1 or Portable One into Self Test mode:
1. Press and hold the AC Mains button while turning ON the AC power switch.
2. The lower left soft-key will now read SELF TEST—press it to begin.
Before running the Self Test, it is recommended to reinitialize the instrument (see the KB article on reinitializing).
The analyzer should be sufficiently warmed up (turned on for 1 hour) before running the Self Test.